1550nm ultra-narrow linewidth laser diode is a high-performance semiconductor laser product integrating silicon photonic chip technology, ECL external cavity laser technology, and advanced packaging technology.This product has the characteristics of narrow line width, high optical power, stable wavelength, low noise, low power consumption, and high reliability. It is a semiconductor laser product with superior performance.This product can be used in Lidar, coherent detection, optical fiber sensing, medical photonics, scientific research equipment, 3D measurement and other fields, and can also be customized according to customer application requirements. 1550nm ultra-narrow linewidth laser diode adheres to the corporate culture of "Innovation, Responsibility, Excellence, Customer, Dedication", and perseveres in providing customers with a variety of high-quality laser products and services.
Name | Model | Description | Parameter | Price |
---|
● Ultra-narrow linewidth (≤5 kHz)
● Single-frequency central wavelength 1550nm, support C-band arbitrary wavelength customization
● Stable output power and wavelength
● High output optical power
● Low RIN noise
● low power consumption
● 14Pin BF Package
Technical Advantage
● Silicon photonic integrated chip technology
● ECL External Cavity Lasers
● Tunable photonic technology
● Ultra-narrow line width
Limit parameter
During use, the environmental conditions and parameter settings should not exceed the following limit values; otherwise, it may lead to poor performance of the device, shorten the product life, or cause damage to the device. Any product problems caused by this are not covered by the warranty.
Specification | Symbol | Condition | Min. | Typ. | Max. | Unit |
Storage Temperature | TS | -40 | 85 | ℃ | ||
LD forward voltage | VLD | 1.6 | 1.8 | V | ||
LD forward current | ILD | 500 | mA | |||
TEC current | ITEC | 1.5 | A | |||
TEC voltage | VTEC | 3 | V |
Optical and electrical parameters (TLD=25℃)
Specification | Symbol | Condition | Min. | Typ. | Max. | Unit |
Threshold Current | Ith | CW | 35 | mA | ||
Central Wavelength | λC | 1530 | 1550.12 | 1565 | nm | |
Fiber optical power | Pf | CW | 10 | mW | ||
Lorentz line width * | FWHM | CW | 5 | kHz | ||
Light Noise | PhN | light noise@10Hz | 7E+05 | Hz rms^2/Hz | ||
light noise@200Hz | 6E+03 | Hz rms^2/Hz | ||||
Relative Intensity Noise | RIN | ≥ 1kHz | -140 | dB/Hz | ||
Side Mode Suppression Ratio | SMSR | CW | 50 | dB | ||
Polarization extinction ratio | PER | CW | 20 | dB | ||
Optical isolation ratio | ISO | 50 | dB | |||
TEC set temperature | TTEC | CW | 15 | 45 | ℃ | |
Operating Temperature | To | -20 | 70 | ℃ | ||
Operating Humidity | % | 5 | 85 | % |
*Determination of Lorentz line width by self-heterodyne method with time delay
Spectrum
L-I Curve
Typical Lorentz line width ( ≤5kHz)
Pin Definition (N type pin)
PIN# | Function | PIN# | Function |
1 | TEC + | 8 | NC |
2 | Thermistors | 9 | NC |
3 | PD - | 10 | LD+ |
4 | PD + | 11 | LD- |
5 | Thermistors | 12 | NC |
6 | NC | 13 | Case |
7 | NC | 14 | TEC - |
Pigtail and Connector Definition
No. | Part Description | Parameter | Unit | Note |
1 | Pigtail type | PANDA PMF φ0.9mm red | SMF/PMF Optional | |
2 | Pigtail Length | 1200 ±10 | mm | |
3 | Connector | FC/APC |
● Lidar
● Coherent Detection
● Fiber Optic Sensing
● Medical Photonics
● Scientific research equipment
● 3D surveying and mapping