LD-PD INC DFB laser has the characteristics of ultra-low RIN noise, ultra-narrow linewidth and high output optical power. It is widely used in vehicle-mounted laser radar, optical fiber sensing detection system and high-precision measurement. We can provide customized services and corresponding technical support according to customers' needs.
Name | Model | Description | Parameter | Price |
---|
● Optical power: 180mW
● RIN noise: -163dBc/Hz@100KHz
Index | Symbol | Min | Typ | Maximum | Unit | Condition |
Output Power | Po | 100 | 130 | mW | CW | |
Center Wavelength | λc | 1399.5 | 1400 | 1400.5 | nm | T=25℃ |
Spectral Linewidth (FWHM) | ΔνL | 200 | 300 | KHz | Lorentz linewidth | |
Side Mode Suppression Ratio | SMSR | 40 | dB | CW, @Po | ||
Polarization Extinction Ratio | PER | 20 | dB | Applicable to polarization maintaining, along the slow axis | ||
Relative Intensity Noise | RIN | -163 | -155 | dB/Hz | ||
Optical Isolation Ratio | ISO | 40 | dB | |||
TEC Set Temperature | TTEC | 15 | 40 | ºC | ||
Threshold Current | Ith | 15 | 30 | mA | @TTEC | |
LD Working Current. | Ib | 800 | mA | CW, Po | ||
LD Working Voltage | Vf | 1.5 | 1.8 | V | CW, Po | |
PD Bias Voltage | VR | 4.75 | 5 | 5.25 | V | Cathode to anode. |
PD Current | Imc | 2 | mA | @Po | ||
PD Dark Current | Imd | 1 | nA | VR=5V | ||
Working Temperature | To | -40 | 25 | 80 | ⁰C | |
Storage Temperature | Ts | -40 | 80 | ⁰C |
Spectrum
Linewidth Measurement(CW,25deg)
L-I Curve
Pin | Description | Pin | Description |
1 | Thermistor | 8 | NC |
2 | Thermistor | 9 | NC |
3 | LD cathode (-) | 10 | NC |
4 | PD anode (-) | 11 | LD anode (+) |
5 | PD cathode (+) | 12 | NC |
6 | TEC anode (+) | 13 | LD anode (+) |
7 | TEC cathode (-) | 14 | NC |
● Tunable diode laser absorption spectroscopy
● Lidar
● Long distance Fiber Communication
PL-DFB-□□□□-☆-A8▽-XX-14BF-C1.0
□□□□: Wavelength
1550: 1550nm
*****
1560: 1560nm
☆: Output Power
A: 50mW
B: 100mW
C: 180mW
▽: Wavelength Tolerance
1: ±1nm
2: ±2nm
XX: Fiber and Connector Type
SA=SMF-28E+ FC/APC
SP=SMF-28E+ FC/PC
PP=PM Fiber+ FC/PC
PA=PM Fiber+ FC/APC