The LD-PD’S PMMBP Series Polarization Maintaining Mirror with Bandpass Filter 10 nm is the result of years of extensive experiences in magneto-optics technology. The components demonstrate low insertion loss and robustness against environmental variation, making them ideal candidates in the field applications of fiber-optics sensing systems, and test & measurement instrumentation.
● High Power Stability
● Low Insertion Loss
● High Isolation
● High Extinction Ratio
Tsub=25°C, CW bias unless stated otherwise
*IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis
PM980 Fiber Nominal Characteristics and Tolerances
● Femto-second Fiber laser application
● Dense wavelength division multiplexing (DWDM)
● EDFAs for small package designs
● High power Fiber laser
PL- PMMBP -BW△-W□□□□-□□-□-XX (PMMBP：Polarization Maintaining Mirror with Bandpass Filter)
BW△:Band pass Width
L:900um Loose tube
F:Fast axis alignment
S:Slow axis alignment
XX: Fiber and Connector Type
PPN= PM 980 fiber+None
PP= PM 980 fiber + FC/PC
PA= PM 980 fiber + FC/APC
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.