Wavelength 633nm; Optical output 30mW; linewidth < 1MHz; PM630; FC-APC; 14-pin BF; with TEC
Part Number : PL-NL-0633-B-A81-PA |
Unit Price : USD [Please inquire] |
Lead time : [Please inquire] |
Inventory quantity : [Please inquire] |
Stock NO. : A80111002 |
Email Us Request for Quotation |
The PL-NL series Fiber Bragg Grating laser is single frequency laser diode module designed for optical measurement and communication. The laser is packaged in 14-pin standard butterfly package with monitor photodiode and thermo-electric cooler (TEC).
Optical Characteristics (at 25 °C laser temperature)
Parameter | Symbol | Condition | Min. | Typical | Max. | Unit |
Center Wavelength | λc | TL=15~35℃ CW | 631.5 | 632.5 | 633 | nm |
Peak Optical Output Power | PO | - | 10 | - | 30 | mW |
Spectral linewidth | LW | - | - | 1 | 10 | MHZ |
Relative Intensity Noise | RIN | -145 | db/HZ | |||
SMSR | SMSR | CW | 40 | 50 | - | dB |
PER | ER | - | 20 | - | - | dB |
Wavelength drift with case (-10 to 70 ºC) temperature | △λ | TL=15~35℃ | - | - | ±1 | pm |
Wavelength Temperature coefficient | Δλ/ΔT | TL=15~35℃ | - | 80 | pm/ºC | |
Wavelength Current coefficient | Δλ/ΔΙ | - | - | 1 | pm/mA | |
Mode Hope free Range | ΔI | 3 | mA |
Electrical Characteristics (at 25 °C laser temperature)
Parameter | Symbol | Condition | Min. | Typical | Max. | Unit |
Threshold Current | ITH | - | - | 45 | 65 | mA |
Operating Current | Iop | CW | - | 120 | 150 | mA |
TEC set temperature | Ts | - | 15 | - | 35 | ℃ |
Laser Forward Voltage | VF | CW output power@15 mW | - | 1.3 | 2.5 | V |
Monitor Dark Current | ID | Pf=15mw VRD=5V | - | - | 0.1 | μA |
Thermistor Current | ITC | - | 10 | - | 100 | μA |
Thermistor Resistance | RTH | TLD=25°C, B=3900±100K
| 9.5 | 10 | 10.5 | KΩ |
TEC Current | ITEC | IF=EOL, TC=70°C | - | - | 1.4 | A |
TEC Voltage | VTEC | IF=EOL, TC=70°C | - | - | 2.8 | V |
Spectrum
L-I Curve
Fiber Pigtail Specifications
Parameters | Description |
Fiber Type | SM600/PM630 fiber |
Jacket Type | 900μm loose tube |
Pigtail Length | 1.0±0.1m |
Connector Type | FC/APC |
PM fiber Connector Orientation | Please see the right figure |
Note: The PM fiber and the connector key are aligned to the slow axis,fast axis is blocked