785nm Pump Laser Diode Stabilized with FBG


The PL-FP-785-B-A82-SA-FBG is 785 nm pump laser modules uses a number of revolutionary design steps and the very latest material technologies to significantly improve scalability of the production process. The semicooled 45°C laser diode operation provides for a significant reduction in TEC and overall power consumption. The module meets the stringent requirements of the telecommunications industry including Telcordia GR-468-CORE for hermetic 785 nm pump modules.

The LD-PD Series pump module, which uses Fiber Bragg grating stabilization to lock the emission wavelength, provides a noise-free, narrowband spectrum even under changes in temperature, drive current, and optical feedback. Wavelength selection is available for applications requiring the highest performance in spectrum control with the highest power available.



Product model


Name Model Price
785nm Pump Laser Diode Stabilized with FBG   [PDF]  [RFQ]

PL-FP-785-B-A82-PA-FBG
Stock NO.: A80022036
[Please inquire]
785nm Pump Laser Diode Stabilized with FBG   [PDF]  [RFQ]

PL-FP-785-B-A82-SA-FBG
Stock NO.: A80022035
[Please inquire]


Parameter



Features

● Optical output: Up to 250mW 

● FC-APC connector

● 14-PIN butterfly package

● Fiber Bragg grating stabilization

● Wavelength selection available

● Integrated thermoelectric cooler, thermistor, and monitor diode

● High dynamic range

● Excellent low power stability

Laser Specifications

Electrical/Optical Characteristics (Tsub=25°C, CW bias unless stated otherwise)

Parameter

Symbol

Min

Typ

Max

Unit

Centre Wavelength

λ

784

785

786

nm

Spectral Width

Δλ

0.01

0.08

0.1

nm

Threshold Current

Ith


20

30

mA

Operating Current

Iop


25

500

mA

Fiber output Power

Pf

200

250

300

mW

Tracking Ratio(0.1Pop < Pf< Pop)1

TR

0.52


1.48


Tracking error2

TE

-48

-

+48


Monitor diode responsivity

IBF

0.5


5

uA/mW

Thermistor resistance(Tset = 25°C)3

Rth

9.5

-

10.5

PD Dark Current (VRD=5V)

Id



0.1

uA

Extinction RatioPM VERSION

PER

17

20


dB

Coupled Fiber Type

PM980

Forward Voltage

Vf


1.8

2.6

V

Thermistor Resistance

RT

9.5

10

10.5

Thermistor Temp. Coefficient



-4.4


%/°C

Connector

None   or FC/APC

Thermistor Resistance


Note: 

1. The tracking ratio is a measure of the front-to-back tracking when the output power is varied. On a plot of optical power versus back-face photocurrent, a straight line is drawn between the minimum power (30 mW) and the operating power (Pop) points. The tracking ratio is defined as the ratio between measured optical power (shown as data points on the plot) to the value derived from the straight line.

2. The tracking error is defined as the normalized change of output power relative to Pf at 25°C, that is, (Pf – Pf_25)/Pf_25, over case temperature range of 0 to 75°C, at constant back face monitor current corresponding to the lowest back face monitor current at Pf= Pop of 0°C, 25°C, 75°C.

3. Datasheet for Calculating Temperature from the resistance of the Thermistor is available now. You can contact us for details.


Spectrum

F3E2_tmb.jpg

L-I Curve

t2.jpg

Package Size

9702.png

Pin definition

5e1bcf0e662e1.jpg

1

Thermoelectric Cooler (+)

8

N/C

2

Thermistor

9

N/C

3

PD Monitor Anode (-)

10

laser Anode (+)

4

PD Monitor Cathode (+)

11

Laser Cathode (–)

5

Thermistor 

12

N/C

6

N/C

13

Case Ground

7

N/C

14

Thermoelectric Cooler (–)


HI 780 Fiber Nominal Characteristics and Tolerances

Parameters

Specification

Cut off wavelength

920nm

Max Attenuation

2.1dB/km

Cladding Diameter

125um

Coating Diameter

250um

Core Cladding Concentricity

≤0.5um

Mode Field diameter

5.9um


Absolute Maximum Ratings

Item

Symbol

Unit

Min

Typ

Max

Testing Condition

Case Temperature

TOP

      ℃

-5

25

70


Chip Temperature

TLD

+10

25

50


Operating Current

If-max

mA

0

250

500


Forward Voltage

VR

V

0.8

1.2

1.8


TEC Current

TEC

A

-

1.2

2.0


Tec Voltage

VTEC






Axial Pull Force


N

-

-

5N

3x10s

Side Pull Force


N

-

-

2.5N

3x10s

Fiber Bend Radius



16mm



-

Reverse Voltage(LD)


V

-

-

1.8

C=100pF,R=1.5KΩ,HBM

Reverse Voltage(PD)

VPD

V

-

-

10

C=100pF,R=1.5KΩ,HBM

LD electrostatic Discharge

VESD-LD

V


-

1000


PD electrostatic Discharge

VESD-PD

V


-

500


PD Forward Current

IPF

mA


-

10


Lead Soldering time


S


-

10s

300℃

Store Temperature

TSTG

-40

-

+85

2000hr

Operating Temperature

TOP


-



Relative Humidity

RH


5%


95%

Absolute maximum ratings are the maximum stresses that may be applied to the module for short periods of time without causing damage and are listed in Table 5.Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for extended periods of time or exposure to more than one absolute maximum rating simultaneously may adversely affect device reliability. Specifications may not necessarily be met under these conditions.

Application

● Pump Laser

● Dense wavelength division multiplexing (DWDM) 

● EDFAs for small package designs

● High bit-rate, high channel-count EDFAs

● CATV distribution

Ordering Info

PL-FP-□□□□-☆-A8▽-XX-FBG

□□□□:Wavelength

405: 405nm

633: 633nm

680: 680nm

785: 785nm

915: 915nm

980: 980nm

*****

1550:1550nm

☆ :Output Power

A:100mW

B:200mW

C:250mW

▽:Wavelength Tolerance

1:±1nm

2:±2nm

XX: Fiber and Connector Type

SA=HI780+ FC/APC

SP=HI780+ FC/PC

PP=PM 980 + FC/PC

PA=PM980+ FC/APC


Labeling

Laser Safety

The LD-PD pump laser module emits hazardous invisible laser radiation.The pump laser module emits hazardous invisible laser radiation.Due to the small size of the pump module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below


User Safety

Safety and Operating Considerations

The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.

Operating the laser diode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.

CW laser diodes may be damaged by excessive drive current or switching transients. When using power supplies, the laser diode should be connected with the main power on and the output voltage at zero. The current should be increased slowly while monitoring the laser diode output power and the drive current. Careful attention to heatsinking and proper mounting of this device is required to ensure specified performance over its operating life. To maximize thermal transfer to the heatsink, the heatsink mounting surface must be flat to within .001inch and the mounting screws must be torqued down to 1.5 in/lb.

ESD PROTECTION—Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling laser diodes.



By using this website and services, you agree to our use of cookies. Cookies enable us to better provide member services and record your browsing records in a short time. OK Learn more
close[X]
Your shopping cart
Model Quantity Price Subtotal
Total price:USD:
View shopping cart Settlement